MotoAlliance FIRESTORM cab heater kit for 2020-2026 Polaris Ranger 1000, XP 1000 and SP 570

ATV/UTV CVT Clutching

UTV Cab Heater Guide: How FIRESTORM Heaters Work and Which One Fits

Previous

UTV Cab Heater Guide: How FIRESTORM Heaters Work and Which One Fits

Next

Cold weather is when a side-by-side earns its keep. Feeding cattle, checking fences, running to the deer stand before daylight or plowing the drive all happen in the months when an open cab is miserable. A cab heater changes that. This guide explains how a coolant-fed UTV cab heater works, what you need on the machine for it to actually keep you warm, and which of the FIRESTORM heaters we carry fits the Polaris Ranger, Can-Am Defender, Kawasaki Mule FX and Yamaha Viking. Every fitment and spec below comes from the product listings, so confirm your exact year and model before you order.

How a UTV cab heater works

Your engine already makes plenty of heat. Most of it goes out through the radiator. A cab heater taps into that cooling system with a pair of Y connectors and runs hot coolant through a small heat exchanger (a heater core) mounted in the cab. A fan blows air across the core and out through vents, the same way the heater in a pickup works.

The FIRESTORM heaters from MotoAlliance are built this way. Per the listings, each kit includes:

  • A heat exchanger rated for up to 18,000 BTU from your radiator, with airflow of 0 to 125 CFM
  • Adjustable temperature and fan speed
  • Dedicated driver and passenger vents that turn 360 degrees
  • Two defrost vents aimed at the windshield to help keep it clear of snow and ice
  • A built-in shutoff valve
  • Automotive-grade radiator hose rated from -40 to 120 degrees C, alloy radiator Y connectors, and model-specific brackets and hose lengths
  • All installation hardware and instructions

The model-specific brackets and hose lengths are the reason there is a different FIRESTORM kit for each machine. The heater is meant to mount with a factory look and no visible heater core, so the kit has to match your dash and cooling system. That is also why you cannot grab a heater listed for a different model and expect it to bolt in.

A heater needs a cab to heat

This is the part people skip. A heater blowing into a machine with no windshield is mostly heating the woods. To get real comfort out of a cab heater you want, at a minimum, a front windshield and a roof. Adding a rear panel and doors closes the cab further and lets the heater hold temperature at speed.

The windshield also matters for the defrost vents. Defrost only works if there is glass or poly in front of you to clear. If you are building a winter cab from scratch, plan the windshield and heater together. Below we pair the Ranger and Defender heaters with glass windshields from Kemimoto, since glass holds up to winter wiping and scraping better than poly.

Which FIRESTORM heater fits your machine

Polaris Ranger 1000, XP 1000 and SP 570

The FIRESTORM Cab Heater for 2020-2026 Polaris Ranger 1000/XP1000/SP570 covers a wide spread of full-size Rangers. The listing gives this fitment:

  • 2020-2026 Polaris Ranger 1000 Base, EPS, Premium and Northstar models
  • 2018-2026 Polaris Ranger XP 1000 models
  • 2022-2026 Polaris Ranger SP 570 models

Note that the XP 1000 coverage starts at 2018, while the Ranger 1000 coverage starts at 2020. If you have an older Ranger, check the full Ranger list in our cab heater collection before ordering, because MotoAlliance makes separate kits for other Ranger generations.

Pair it with: the Kemimoto 9/32" Glass Windshield with Electric Wiper for Polaris Ranger. It is 9/32 inch laminated, scratch-resistant glass with an anti-glare tint and a 12V wiper motor with an On, Off and Reset switch. The wiper sweeps 165 degrees and is laid out so it does not hit the roof. The listing gives fitment for the 2020-2026 Ranger 1000 and Crew 1000, the 2017-2026 Ranger XP 1000 and Crew XP 1000, the 2013-2019 Ranger XP 900, the 2015/2016-2019 Crew XP 900, and the 2015-2016 Ranger Crew 900. The wiper motor needs to be wired in, and the glass is heavy, so plan on a second person for the install.

Can-Am Defender

The FIRESTORM Cab Heater for 2017-2025 Can-Am Defender is listed for 2017-2025 Can-Am Defender models, with brackets and hose lengths specific to the Defender. It has the same core features as the rest of the line: up to 18,000 BTU, adjustable heat and fan, driver and passenger vents, and two defrost vents.

Pair it with: the Kemimoto Can-Am Defender Glass Windshield with Manual Wipers. It uses 5 mm laminated safety glass in a steel frame, with a hand-operated wiper that covers more than 90 percent of the glass and rubber seals to cut rattle. The wiper is laid out to clear a factory or aftermarket roof. Fitment per the listing is the Defender HD5, HD7, HD8, HD9 and HD10, plus Defender MAX and X MR models, 2016-2026. The heater listing starts at 2017, so a 2016 Defender owner should call us about the heater before ordering.

Kawasaki Mule FX

The FIRESTORM UTV Cab Heater for 2016-2026 Kawasaki Mule FX is listed for the 2016-2026 Kawasaki Mule FX 820/1000. Mules spend a lot of winter mornings working on farms and hunting land, which is exactly where a heater with defrost pays for itself. Kawasaki has built several Mule families over the years, so match your model name and year to the listing before you buy.

Yamaha Viking

The FIRESTORM UTV Cab Heater for 2017-2026 Yamaha Viking is listed for 2017-2026 Yamaha Viking models, and the fitment section on the product page names the Viking 3-Seat. If you run a Viking VI six-seat, ask us before ordering since the listing calls out the 3-seat.

Install tips before you start

  • Work on a cold engine. The heater ties into the cooling system. Never open the radiator or hoses while the coolant is hot or under pressure.
  • Top off and bleed the coolant. Adding a heater core and hoses adds volume to the cooling system. After the install, top off the coolant and check the level again after the first warm-up, following your machine's service manual.
  • Check for leaks. Look over every hose clamp after the first ride and again after a few heat cycles.
  • Use the shutoff valve. The built-in shutoff valve gives you a way to stop coolant flow to the heater when you do not need it.
  • Read the instructions first. MotoAlliance says its instructions are written in English by the engineers who installed the prototypes, and each kit comes with model-specific brackets. Follow their routing rather than improvising.

Quick buying checklist

  • Match the heater to your exact make, model and year. Each FIRESTORM kit is model-specific.
  • Make sure you have, or are adding, a front windshield and roof. Without them the heater cannot keep up.
  • If you are adding a windshield in the same order, consider glass for winter use. The two Kemimoto glass windshields above both come with a wiper.
  • Have coolant on hand to top off after the install.

Shop cab heaters

We carry FIRESTORM heaters for many more machines than the four above, including Polaris RZR and General, Can-Am Maverick and Commander, Honda Pioneer and Talon, Kawasaki Teryx and KRX, and Yamaha RMAX and Wolverine. Browse the full list in our UTV cab heater collection and match your machine to the fitment on each listing.

Shipping is free anywhere in the US, including Alaska and Hawaii, with no minimum order, and orders typically arrive in 3-7 business days. Not sure which heater or windshield fits your machine? Call us at 662-631-9254 or email msautodetail@outlook.com with your year, make and model and we will check it for you.

By Fix N Offroad