SuperATV 2017+ Can-Am Defender aluminum half doors

ATV/UTV CVT Clutching

UTV Doors Guide: Half Doors vs Upper Doors vs Convertible Full Doors

Previous

UTV Doors Guide: Half Doors vs Upper Doors vs Convertible Full Doors

Next

Doors change how a side-by-side feels more than almost any other add-on. They keep mud, brush and rocks off your legs, they make the cab feel solid, and the right set turns an open machine into something you can ride in cold rain. The hard part is that "UTV doors" covers several very different products. This guide breaks down the main styles, half doors, upper doors and convertible full doors, and walks through six SuperATV door sets we carry for the Can-Am Defender, Yamaha Viking, Honda Talon, Honda Pioneer 1000-6 and Polaris General. Every spec and fitment below comes straight from the product listings, so check your exact model and year against the listing before you order.

Three kinds of UTV doors

  • Half doors cover the lower part of the opening, roughly to elbow height. They block mud, roost and branches and give you an armrest, but leave the top open for airflow.
  • Upper doors fill in the top half of the opening above an existing lower door. They are how you close in a cab for rain and cold. Some are hard polycarbonate on a steel frame, others are soft panels with roll-up windows.
  • Convertible full doors cover the whole opening and let you remove the top half when the weather turns nice. They are the most complete option for a machine you ride year-round.

Before you pick, think about how you use the machine. If you are mostly hauling feed and fence posts in summer, half doors may be all you need. If you hunt in November or plow snow, you want something that seals up, and you will want a roof and windshield to go with it.

Half doors for the Can-Am Defender: aluminum vs HDPE

The Defender gets two different half-door options from SuperATV, and the choice comes down to material.

SuperATV Can-Am Defender Aluminum Doors

The SuperATV 2017+ Can-Am Defender Aluminum Doors are suicide-style half doors built from 2 mm aluminum plate on 1-inch diameter tubing, powder coated Wrinkle Black. Per the listing they are shaped to follow the Defender's body lines, sit at a height where your arm rests naturally on top, and use a heavy-duty hinge that will not overextend. The handles are placed so they will not bang your knees, and the doors ship assembled.

They come in two versions: Defender (2 Door) and Defender MAX (4 Door). The listing covers a long run of Defender HD5, HD7, HD8, HD9 and HD10 models, including DPS, XT, XT Cab, XMR, 6x6, Limited and Pro HD10 trims, plus MAX HD7, HD8, HD9 and HD10 models. Year ranges vary by model, so check your exact trim on the fitment chart.

SuperATV Can-Am Defender HDPE Half Doors

The SuperATV 2017-2025 Can-Am Defender HDPE Half Doors are made from 5/8-inch HDPE. SuperATV says that makes them 38% stronger than aluminum doors, and they cost less. They have a textured finish to hide wear, a rubber bulb seal for a tight fit, and Southco heavy-duty rotary latches that resist corrosion.

This listing is for the two-seat Defender, covering HD5, HD7, HD8, HD9 and HD10 models (including DPS, XT, XMR, 6x6, Limited and Pro HD10 trims) per the fitment chart. If you have a MAX, use the aluminum doors above, which offer a MAX version.

Which one? If your Defender works hard around brush, posts and equipment, the HDPE doors are the tougher and more affordable choice. If you want the factory-style look in a lighter metal door, or you need a MAX set, go aluminum.

Convertible full doors: Yamaha Viking and Honda Pioneer 1000-6

SuperATV Yamaha Viking Convertible Cab Enclosure Doors

The SuperATV 2014+ Yamaha Viking Convertible Cab Enclosure Doors are full hard doors made from 1/4-inch lightly tinted polycarbonate with a scratch-resistant hard coating, mounted to a powder-coated tubular frame. Each door has a built-in sliding window, the top half comes off for airflow, and the full door can be removed for summer. They include key-locking latches and bolt-on side-view mirrors, ship preassembled, and the listing notes they are made in the USA.

There are 2-door and 4-door versions. Listed fitment includes the 2014+ Viking and Viking EPS, 2015+ Viking EPS SE, 2018+ Viking EPS Ranch Edition, and Viking 6 models (Viking 6 2015-2017, Viking 6 EPS 2015+, Viking 6 Ranch Edition 2016+, Viking 6 EPS SE 2015-2016).

SuperATV Honda Pioneer 1000-6 Convertible Cab Enclosure Doors

For the six-seat Honda, the SuperATV 2023+ Honda Pioneer 1000-6 Convertible Cab Enclosure Doors use the same idea: lightly tinted 1/4-inch polycarbonate with SuperATV's XR Optic Hard Coating, a powder-coated carbon steel frame, and Secure Seal technology (a full-length bulb seal plus gas struts) for a leak-free, rattle-free fit. To go from full doors to half doors, you remove the bolts on the bottom portion and unhook the gas strut. The set includes sliding windows, bolt-on side-view mirrors and lockable latches. Listed fitment is the Honda Pioneer 1000-6, 2023 and newer.

Upper doors: Honda Talon and Polaris General

SuperATV Honda Talon 1000 Cab Enclosure Doors

The Talon comes with factory half doors, and the SuperATV 2019+ Honda Talon 1000 Cab Enclosure Doors mount to those OE half doors to close in the top. They are 1/4-inch lightly tinted, abrasion-resistant polycarbonate with a hard coating on a powder-coated carbon steel frame. Secure Seal bulb seals keep air out and rattles down, gravity hinges make removal and reinstall easy, and a hinge flap lets you reach through to the door lever from outside. Bolt-on side-view mirrors are included.

Listed fitment is the 2019+ Honda Talon 1000X and 1000R. One important note from the listing: these doors do not work with the OEM roof, so plan on an aftermarket roof if you are building a full enclosure.

SuperATV Polaris General 1000 Primal Soft Cab Enclosure Upper Doors

If you want weather protection without hard panels, the SuperATV 2016+ Polaris General 1000 Primal Soft Cab Enclosure Upper Doors are a soft option. They are PVC-backed polyester using SuperATV's Pel-Tek material, which the listing says resists water, punctures, abrasion, UV and mildew, and they are CNC cut so they do not sag. The double-polished vinyl windows roll up on snag-free zippers and snap open for airflow. The doors attach with industrial-strength Velcro and frame-mounted snaps, with cinch straps for riding or trailering.

Choose 2 Seat for the 2016+ General 1000 or 4 Seat for the 2017+ General 4 1000.

Things to check before you buy doors

  • Exact model and trim. Door sets are model-specific. A Defender MAX needs a different set than a two-seat Defender, and the Viking and Viking 6 use different versions.
  • Roof compatibility. Upper and full doors seal against the roof line. The Talon doors above specifically do not work with the OEM roof.
  • The rest of the enclosure. Doors alone will not keep a cab warm. For cold-weather riding pair them with a roof, front windshield and rear panel. Our earlier UTV cab heater guide covers how a heater fits into a closed cab.
  • How often you will remove them. Convertible doors and gravity-hinge designs come off quickly. Bolt-on half doors are meant to stay on.

Shop SuperATV doors and enclosures

We carry SuperATV doors, roofs and windshields for many more machines than the ones above, including Polaris RZR and Ranger, Can-Am Maverick X3 and Yamaha Wolverine RMAX. Browse the full SuperATV collection and match your machine to the fitment on each listing.

Shipping is free anywhere in the US, including Alaska and Hawaii, with no minimum order, and orders typically arrive in 3-7 business days. Not sure which doors fit your machine? Call us at 662-631-9254 or email msautodetail@outlook.com with your year, make and model and we will check it for you.

By Fix N Offroad