Hunterworks CF MOTO Clutch Holder Tool

Clutch bolts are not a place to guess. When you torque a primary or secondary clutch on a CFMoto U10 Pro, something has to hold the clutch still while you pull on the wrench. Without a holder you end up bracing against the belt, jamming a screwdriver into the sheaves, or letting the engine take the load through the crankshaft — and all three are how clutch faces get scored and crank threads get ruined.

The Hunterworks CFMoto clutch holder tool does one job and does it correctly: it holds the clutch so you can break the bolt loose on the way out and torque it back to specification on the way in.

Fitment

• 2025 CFMoto U10 Pro

What you get

• One Hunterworks CFMoto clutch holder tool, made in the USA
• Works with a standard torque wrench

Install notes

• Use it in both directions — loosening and final torque. The loosening pass is where most damage happens.
• Pair it with the Hunterworks U10 Pro primary clutch puller if you are taking the primary all the way off.
• While the cover is off, clean the belt dust out of the sheaves and check that the CVT intake and exhaust ducting is sealed and clear. Heat is what kills belts.
• Torque to the value in your service manual. Too loose and the clutch walks on the taper; too tight and you stretch the bolt.

Why buy from Fix'N Offroad

• Free shipping on every US order
• Authorized Hunterworks dealer — USA-made tooling, not offshore copies
• We answer the phone: (662) 631-9254

Not sure this is the tool your machine needs? Call us before you order. Related: U10 Pro parts, clutch torque tools, all clutch tools.