Can Am Secondary Roller Pin Pulling Tool

Getting roller pins out of a Can-Am secondary clutch is one of those jobs that is genuinely miserable without the right tool and genuinely easy with it. This Hunterworks tool pulls the pins with a single wrench, no heat, no drifting the pin sideways, no damage to the clutch.

Fitment

Any 3-roller style Can-Am secondary clutch. If you are not sure how many rollers your secondary has, call us before you order.

What you get

• High-strength steel threaded main rod
• 4mm set screw and 4mm nut
• 1/2" nut and washer

The roll pin punch is not included. The 5/16" punch shown in the photo is a separate option, made in the USA — select it if you do not already have one. A secondary spring compressor and a clutch holding tool are also optional add-ons, and both make the job easier if you are doing a full roller service.

While you are in there

If the pins are coming out, the rollers are almost certainly worn, and worn rollers are what stop a secondary backshifting cleanly. We stock the replacements: three Can-Am secondary clutch rollers or a pair. Check the helix faces for grooving at the same time — new rollers running on a chewed-up helix will not last.

Why buy from Fix'N Offroad

• Free shipping on every US order — no minimum
• Authorized Hunterworks dealer, genuine USA-made tools
• CVT clutch parts are all we sell, so fitment questions get a real answer

Call (601) 771-0070 with your machine and we will confirm the tool and the rollers together. Related: all Can-Am parts, all clutch tools, belt change tools.